No-Click True Bypass Installed On Your Pedal!

Description

From Modest Mike’s
Mods
No-Click True Bypass installed on your pedal!
Let’s say you have an effects pedal plugged into your system, but the pedal is not switched on (this is known as the bypass sound). Your signal still has to pass through the electronics of the pedal. This can result in a loss of tone, especially the highs.
True bypass eliminates “tone sucking.”
We have done hundreds of true bypass mods. Normally for starters I might have to drill a half inch hole in your pedal. Then I would replace the stock foot switch with a 3PDT foot switch (stomp on, stomp off, loud clicks). This allows me to rewire the pedal for true bypass. We still do this mod because some musicians like to feel and here the “click.”
Times and technologies change.
There are only a couple of silent or
no-click
type true bypass switch systems on the market now that can be installed inside your pedal
without affecting the pedal’s appearance.
This type of true bypass mod
eliminates the mechanical click
associated with 3PDT switches. It also
eliminates the electrical pop
noise that can be heard through your rig with a standard stomp switch.
I use the
Griffin Silent Step True Bypass System
.
*Note: on some pedals, the no click system needs to be installed in the battery compartment This means you will need an outside adapter to power your pedal, using the pedal’s power jack.
Turnaround time is usually only 3 business days!
Check out eBay item number 220879845411 for a list of pedals we can modify. We also keep some of these pedals in stock, already modified for better sound, all warrantied as new!
We make your sounds…sound good!
Thanks for looking!
Mike