DEADfx 532 EQ

Description

A 10 band Graphic EQ packed with a ridiculous amount of features to make this the only graphic EQ pedal you will ever need again. Let me break it down for you…
- 10 band Graphic EQ with custom frequency points (Urei 530 or API 560 frequency versions)
- Send and Return jacks to use as an optional insert loop to EQ the pedals in the loop.
- Clean blend knob to blend back in your input tone with the EQ’d send/return loop, or leave this loop unused to simply use it as a standard Graphic EQ with a clean blend… “Parallel EQ”.
- PRE/POST pushbutton for routing the graphic EQ circuitry before or after the Send/Return loop.
- Volume on it’s own potentiometer (not a fader).
- On board sweepable Hi and Low pass filters switchable in and out of circuit.
- Soft touch footswitch MCU controlled relay true bypass switching.
- Low noise floor, small form factor, robust.
- Runs on standard 9v boss style pedal power supply with internal power circuitry generating high headroom +/- 15V supply rails for higher quality audio signal.
And for the cherry on top…
- All the jacks are TRS and the input/output stages are designed to accept either unbalanced instrument level or balanced line level signal and output the corresponding unbalanced (instrument) or balanced (line) signal. TRANSLATION: You can also use this pedal as a line level outboard EQ for recording/mixing duties. Patch it in on a vocal, drum, bass, synth, horn, or guitar track and use the Graphic EQ like you would any studio outboard EQ.